Description: It is agglutination mortar which has high stability, elasticity feature and large usage range
Fields of Usage: It is used to flor faience, marble and other natural Stones, on moving floors and surfaces which are exposed to sudden heat change, in factory buildings, undergrounds and footbridges, at places where people circulation is numerous and that are exposed to vibration.
Application: 25 kg. Aragonit ceramic and faience adhesive is mixed with 6-7 liters of water with a low-speed mixer until a homogenous mixture has been obtained without any roundish lumps. This mixture is left to settle approximately for 10 minutes and after mixing again, it is ready to be used. Dust, dirt, debris, oil etc. on the surfaces on which the mortar will be applied should be cleaned. The mortar is applied via a trowel and then harrowed. The coating material is plastered and hammered with a rubber hummer and freed from any possible cavities under the coating material. 24 hours after the application, the joint spaces are filled with Aragonit joint filler.
Warnings and precautions:
Cautions and Precautions
It keeps its shelf life in unopened package under proper stocking circumstances.