Constructions

FLEX joint grouting filler A2050
forsah for real estate investment

FLEX joint grouting filler A2050

Description: It is a joint filler material which has high stability, elasticity  feature and large usage range.

Fields of Usage: It is used to fill the joint gaps of faience, marble and other natural Stones on moving floors, on surfaces which is exposed to sudden heat change, in factory buildings undergrounds and footbridges and at places where people circulation is numerous and that is exposed to vibration.

Applications Instructions:

Application: 20 kg. Aragonit joint filler is mixed with 5,5 – 6,5 liters of water with a low-speed mixer until a homogenous mixture has been obtained without any roundish lumps. This mixture is left to settle approximately for 10 minutes and after mixing again, it is ready to be used. Dust, dirt, debris, oil etc. on the surfaces on which the mortar will be applied should be cleaned. The mortar is applied with a rubber trowel and straightened with rubber mat. After 1-2 hours following the application, the joints are cleaned with wet sponge. When the cleaning process is over, the last cleaning is done with a dry piece of cloth. The floor can be operational after 24-48 hours.

  • Rates of Mixtures: For a package of 20 kg. it is mixed with 5,5 – 6,5   liters of water
  • Consumption Amount: 0,5-0,7 kg. for per 1 m2
  • Color: White and Colored
  • Pot Life: 2 hours
  • Shelf Life: 1 year in dry and humid-free environment
  • Stocking: Max. 10 packages can be piled
  • Package: 5 kg. – 10 kg. - 20 kg. craft package

 

Warnings and Precautions:

Cautions and Precautions

  • Application temperature should be between +5 and +35 C degrees.
  • Application surfaces should be free from elements, such as dust, dirt, sweeps, oil etc.
  • The mixer’s working rate should be maximum 120 speed.
  • The prepared mortar should be consumed within 2 hours
  • No additives other than water should be put into the material
  • The surface should be protected from wind, water and sunlight during application
  • The cement based materials shouldn’t be breathed directly and their contact with skin should be avoided. During the process, protective clothes should be put on
  • Joints should be clean

Joint filling should be applied 24 hours after ceramic plastering