Constructions

AERATED CONCRETE MORTAR A1400
forsah for real estate investment

AERATED CONCRETE MORTAR A1400

Product Description: It is a masonry mortar used for masonry materials such as aerated concrete Areas of Usage It is used indoor and outdoor aerated concrete masonry works. It does not slip; it is easy to use. 

Applications Instructions:

Preparation for Application: The hardness, water absorption, and stability of the surface on which application will take place is to be checked beforehand and gaps on the surfaces and places where repairs are to be done should be repaired beforehand. Application surfaces is cleaned from dust, dirt, debris, oil and so on.

 

Mixing and Applying: 6-7 lt. of clean water is poured into mixing container and the adhesive is added slowly and mixed until a homogeneous consistency is acquired. A low speed mixer is used for mixing. Mixing at high speed prevents homogenous consistency. After waiting 5 minutes for ripening time, the re-mixed mortar is ready to use. The mortar applied to the surface is combed with ceramic comb suitable for aerated concrete size. Aerated concert, is glued onto the combed mortar with using rubber mallet.

After the application, application tools should be washed with plenty of water. The process cannot be carried out on expired materials and must be cleaned from the surface. Materials which were hardened and completed of setting in      container does not used.

 

  • Mixture Rate: The 25 kg product is mixed with an average of 6 - 7 liters of water.
  • Consumption Amount: For an average block of 10 cm, 1.7 kg. - block of 15 cm, 2.3 kg- block of 20 cm, 3 kg. (Average for 1 m2) (8x8 mm in comb size)
  • Color: Gray, White
  • Package: 25 kg. In a 3-layer Kraft bag, with stretch
  • Maturity Time: 5 minutes
  • Pot Life: 2 hours (Depended on atmospheric conditions)
  • Shelf life: 12 months from the date of production (In a dry and humidity-free environment)
  • Storage: Can be stacked in up to 8 superimposed rows in a dry and humidity-free environment with unopened packaging.

 

Warnings and Precautions:

Points To Consider: 

  • Application Temperature should be within + 5 ° C / + 55 ° C.
  • Application surfaces should be cleaned from dust, dirt, debris, oil, and so on.
  • The material should be mixed with the help of a mixer with maximum 120 cyclic.
  • The prepared mortar must be used in 2 hours.
  • No additive other than water (like lime, sand, or cement) should be added to the material.
  • The application surface should be preserved from external factors (like wind, sun, and humidity) during and after application.
  • During the application, protective equipment (clothes, gloves etc.) should be used.
  • Hand, eye and body contact should be avoided, in case of contact with eye, immediately wash the eye with plenty of water, if necessary, consult a doctor.